How To Reinstall Windows 98 Without Cd

Microsoft's Windows 98 - MSDOS Install, without floppy deejay, stride past step

Welcome to Microsoft's Windows 98 Install stride by pace from MSDOS without a floppy boot deejay. This will give you lot an idea on how to practise this when and if the time arises for y'all to either reinstall the operating system, install for the first time or upgrade your present operating system. This install guide is fully graphical and volition take you lot through each stride of the installation.

What you volition crave to practice this walkthrough is

A Windows 98 CD
A Calculator with CD-ROM admission

To start this Windows install. Outset check that the get-go boot device in your system BIOS is set up to the CD-ROM Drive.

( To find out how to access the BIOS please refer to your motherboard manual or the manufacturer of your computer. (The organization bios tin usually be entered on boot, unremarkably by pressing the F1, F2, F8, F10 or DEL central. Make sure you save the settings before exiting))

If you are unsure or don't desire to enter the BIOS then simply test the reckoner past putting the CD-ROM in the drive and rebooting the computer. This is the recommended mode to install windows.

You will know that your reckoner volition/has booted of CD-ROM when the post-obit screen appears.

The Microsoft Windows 98 CD-ROM Startup Menu, select option ii either using the arrow keys or past just pressing the number 2 on the keyboard, printing enter.

Now you will have the Microsoft Windows 98 Startup Carte, will appear, select pick 2 either using the arrow keys or past only pressing the number 2 on the keyboard, printing enter. and wait until you lot arrive at a Dos Prompt.

Yous may already be at the CD-Rom prompt, if not type "D:" and hit enter (that is assuming your CD-Rom letter is D:). To ostend where you are type "CD WIN98", if the directory changes you are in the correct place, if not try "Eastward:", repeating the procedure, and continuing up the alphabet until you lot become to Win98 binder. In the example below information technology is "D:\WIN98".

At present assuming y'all are reinstalling Windows 98, you type "FORMAT C:"

WARNING : This will remove all information from your hard drive, and then brand sure you accept backed upwards all the stuff you do not want to loose.

Press "Y" and enter to keep Format once you lot are satisfied that you have to nothing to loose

At present Type "Doc C:\WIN98" and press enter. (This Creates a folder on the Hard Drive called WIN98)

And then Type "Re-create *.* C:\WIN98" and press enter (this copies the Installation files to your Hard Drive)

At present type "C:\WIN98" (You are irresolute to the WIN98 folder on the Hard Drive)

And finally type "Setup" (Windows 98 will first installing)

You Should at present remove the Windows 98 CD, it is no longer required.

Now press Enter to continue, or F3 to go out.

Setup will now perform checks on your system, printing Enter to continue.

Next Scandisk volition run, allow this complete or setup.

Now setup will re-create important files for the install.

Setup has at present begun, the mouse should now exist active, press Continue to proceed. If yous have a change of mind so press Exit Setup. If the mouse is not agile press "ENTER" on the keyboard.

The wizard volition now beginning. Be patient this may take a few moments.

Now select the directory you wish to install Windows into. By default C:\Windows volition be selected. Yous can change this, but it is not advised. Click on Next to Continue.

Setup will now prepare the directory, be patient this may take a moment.

Setup now checks disk space.

What practice you wish to install. Nosotros recommend Typical, which is the default. So click Next to go on.

Windows Components to exist installed will at present be listed. Leave at default and press Next.

If a Network card has been detected the following will appear. Fill up in the details and click Adjacent.

At present your country settings, select equally needed and and so press Next.

Windows will now copy files, this volition take sometime. Be patient

After sometime you will exist prompted to restart, Windows will do information technology itself, you tin click on Restart Now to quicken the procedure.

Booting for first fourth dimension screen will appear.

Now enter your name, visitor is optional. Click on Next to continue.

Now the License Agreement. Read and if you agree click on "I accept the Agreement" and click next. If you select ""I don't take the Understanding" then setup will stop.

At present input your product cardinal or certificate authenticity code. This is xvi digits and is located on the back of your CD case or on the Windows 98 Book. If yous accept an OEM computer and so it could be on the side or back of your computer. Click next to keep.

Side by side click on Finish.

Setup will now finalize the hardware and install settings.

Plug and Play Devices.....

Your computer will prompt to restart....

Windows is booting.

and continuing the install of devices.

Now select your date/time settings, using the downwardly pointer beside GMT -0800.

One time selected click on utilize and so OK.

Windows volition go on to setup Windows items.

The computer will now need restarted over again.

Windows will continue to load.

and update System Settings.

At long last you take arrived at the desktop.

If y'all are lucky you will have no drivers to install, but chances are the next step will be to install them. Cheque out device manager for unknown devices, probable items are Network Cards, Sound Cards, Printers, Scanners, Graphics Cards, Digital Cameras, plus any other detail y'all have.

www.windowsreinstall.com

	Tags: install 98 from msdos, msdos Windows 98 install, install Windows 98 from dos, 98 msdos install, reinstall 98from dos, 98 msdos reinstall, 98se msdos install, install 98se, install win98 from dos, dos reinstall win98, dos install windows 98, reinstall windows 98