How To Remove A Double Hung Window

It's easy to remove and reinsert your double hung window sash. Accept a await at this video that outlines the steps. You can follow along with the instructions below as you watch the video, or print them out for future reference.

How to Remove a Double Hung Window Sash

Step 1: To remove the lower sash, brainstorm by opening it. Lift up on handle equally pictured, or turn the spoon, depending on the window serial you have. (Note: Some windows may have a "window opening control device" that does not let the window to be opened more than a few inches. If your window has that, press information technology in to disable information technology.)

Step 2: Slide the lower sash upwardly 4 inches. Press both Tilt Latch Buttons that are on the top of the sash until they click. Yous'll find these at the left and right ends of the sash.

Pace three:Rotate the sash towards the within of your home until information technology is perpendicular to the wall. Lift up on 1 side 2 inches and and so the other side. Make certain the pivot bars are not continued to the residual shoes and rotate the window out of the frame.

Step 4: Once the lower sash is removed, you can proceed with the upper sash. Slide the upper sash down until it is well-nigh half dozen inches higher than the window sill. Press both Tilt Latch Buttons that are on the meridian of the sash until they click and repeat footstep three.

How to Reinstall a Double Hung Window Sash

Stride ane: To reinstall the sashes, begin with the upper sash first. Hold it perpendicular to the wall. Identify one pivot bar into the inner balance shoe and then do the other side. Make sure the pivot bars are fully seated into the shoes on both sides and give them a piddling pat to secure them in place. This will aid avoid whatever potential damage to the window before proceeding to the next step.

Footstep 2: Rotate the sash upward to brand sure i side does not drop. Push button the sash until information technology contacts the frame fully to appoint the tilt latches. To ensure it is inserted correctly, try to pull it abroad from the frame simply a little with a tug frontwards. It won't pull away if the tilt latches are engaged correctly. If they are not engaged correctly, push the sash over again until it does contact the frame.

Pace 3: Slide the upper sash up and down to check the full range of motion.

Step 4: At present it's fourth dimension to replace the lower sash. Begin by holding information technology perpendicular to the wall. Follow the same process you did in step i when yous reinstalled the upper sash. Go on to stride 2. If you lot cannot get the tilt latches to appoint correctly, telephone call 1-800-Milgard for service.

Pace 5: Slide the lower sash up and down to cheque the total range of motion. Check the performance of the handle or spoon to brand certain the hardware has engaged. If it has not engaged, brand certain the upper sash is all the way upwardly and the lower sash is all the style downward.

You tin can observe more "How To Videos" on milgard.com.

How To Remove A Double Hung Window,

Source: https://www.milgard.com/blog/how-remove-and-reinsert-double-hung-window-sash

Posted by: moonalock1990.blogspot.com

Share this post